Use the 4 search options:
1) Fast search
General Catalogue


2) Advanced search
4 search options;


3) Group alphabetical search


4) Product category

Click on
the choosen category
CATEGORY INDEX
1. Spares for boilers, burners and stoves
1.01 Spares for gas boilers
1.02 Spares for gas oil boilers
1.03 Spares for boilers and biomass stoves-wood/pellet/chippings
1.04 Plate heat exchangers
1.05 Flue fans for boilers
1.06 Circulating pumps
1.07 Fans for boilers
1.10 Temperature probes
1.15 Spares for manufacturers of components
1.20 Spare Parts Sorted by Gas and Oil Boiler Manufacturers
1.25 Spares made for biomass boilers and stoves manufacturers
2. Heating components, air conditioning and plumbing
2.01 Heating: valves accessories and complementary components
2.05 HEAT PUMPS: Valves and Accessories
2.10 Thermoregulation systems
2.15 Air conditioning:valves accessories and complementary components
2.16 Gas: components for pipes, complementary and accessory
2.17 Gasoil: components for pipes, complementary and accessory
2.18 Solar: pipes, valves, complementary and accessory for solar systems
2.19 Chippings and pellet: components for feed pipes boilers and stoves
2.30 Pipes, complementary fittings and accessories for waterworks systems
2.35 Heat exchangers
2.40 Water testing and control
2.45 Pressure, temperature, water level: check and control
2.60 DHW RECIRCULATION: domestic hot water recirculation pumps and related accessories
2.70 Sanitaryware tapwork: accessory and complementary articles
2.75 Drain pipes: bottle traps, WC CISTERNS accessory and complementary
2.85 Pipe clips, brackets, and fixing clamps, accessory and complementary
2.88 Sealants, washers and watertight material
3. Components for solar and biomass
3.01 Solar : system components
3.05 Biomass: thermal system components
4. pumps circulators and accessories
4.01 Water lifting pumps
4.02 Water pumping and booster groups
4.03 Pressure and level controls - relevant articles
4.04 Irrigation
4.05 Circulating pumps
4.06 Recirculation pumps
4.07 Circulators - relevant and complementary articles
4.11 Auxillary gasoli burner pumps
4.12 Pumps for gasoli burners and similar
5. Temperature control
5.00 Radiator valves
5.01 Thermostats
5.02 Humidistats
5.03 Electronic temperature control
5.04 Zone valves, motorised valves electrothermal and similar
5.05 Electrical and thermostatic mixing
5.06 Servomotors and electric actuators thermostatic and similar
5.07 Preassembled modules and temperature lowering units
5.08 Time clocks and meters
5.10 Solenoid valves
6. Pipes, fittings and valves
6.01 Pipes
6.02 Chimney articles
6.03 Distributor manifolds
6.04 Classic threaded brass fittings
6.05 Copper pipe fittings
6.06 Polyethylene and multilayer pipe fittings
6.08 Stainless corrugated pipe CSST relevant and complmentary articles
6.10 Fittings for radiators
6.12 Plastic caps for pressure testing systems on building sites
6.15 Connection flanges relevant and complmentary
6.18 Pipe clips, brackets, and fixing clamps, accessory and complementary
6.20 Valves and components for sanitaryware
6.25 Valves and components for gas pipes
6.30 Valves and components for gasoil pipes
6.33 Valves and components for boilers and biomass chimneys
6.35 Valves and components for feed pipes pellet and chippings
6.40 pipes, valves and components for solar panels
6.50 Waterproof sealants and materials
7. Instruments, tools and maintenance products
7.05 Working tools
7.10 Working instruments
7.15 Maintenance equipment
 
New articles
 
NEW PRODUCTS
 
PROMOTIONS
 
What do you think ?
 
Send your comments to the new ANTARES web site
 
 
CATEGORY INDEX
Heating components, air conditioning and plumbing (2.)
Heating: valves accessories and complementary components (2.01)
Thermal power stations: components (2.01.15)
Anti condensation valves for biomass boilers (2.01.15.75)

Automatic deareators (2.01.15.55)

Automatic feeder (2.01.15.65)

Ball valves for water and gas (2.01.15.10)

Check valves (2.01.15.20)

Circuit separators (2.01.15.37)

Circulating pumps (2.01.15.25)

Dirt separators (2.01.15.40)

Expansion Vessels (2.01.15.60)

Gate valves (2.01.15.15)

Heat exchangers (2.01.15.35)

Hydraulic separators (2.01.15.08)

Hydraulic separators: accessory and complementary (2.01.15.09)

Large and medium capacity manifolds for thermal plants (2.01.15.01)

Manifolds for thermal power stations: accessory and complementary (2.01.15.03)

Manometers and thermometers (2.01.15.70)

Mixing valves (2.01.15.45)

Relaunch modules (2.01.15.05)

Safety valves (2.01.15.50)

Thermal power stations: accessory and complmentary (2.01.15.77)

Valves for circulating pumps accessory and complementary (2.01.15.30)

Thermal power stations: components
<<<   page    1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 >>>

E.660 Vertical manual deareator for insertion in return flow pipes in solar systems . Conn: 1"M x 3/4"M

E.670 Circuit decoupler separator “SEPACIR” with covering. Connections: ¾” for heating and ½” for circuit power supply.

E.690 Hydraulic separator DN 25 in stainless steel AISI 304 L complete with thermal insulating shell, automatic deaerator with check-valve and mud draining tap. Flow rate max 3 mc/h – Pressure max 10 bar.

E.691 Hydraulic separator DN 32 in stainless steel AISI 304 L complete with thermal insulating shell, automatic de-aerator with check valve and mud draining taps. Flow rate max. 6 mc/h – Pressure max. 10 bar.

E.692 Hydraulic separator DN40 in stainless steel AISI 304 L complete with thermal insulation shell, automatic deaerator with check valve and sludge discharge tap. Max. flow rate 8 mc/h. - Max pressure 10 bar


E.693 Hydraulic separator DN50 in stainless steel AISI 304 L complete with thermal insulation shell, automatic deaerator with check valve and sludge drain tap. Max. flow rate 12 mc/h. - Max pressure 10 bar.


E.700 “FLUIDHUB” coplanar manifold for hydronic systems, in coated steel with outlets distance 125 mm., suitable for pumps groups DN 20. Equipped with connection (nut M8) for fixing bracket. Includes insulating shell.

E.704 “FLUIDHUB” ” coplanar manifold for hydronic systems, in coated steel with outlets distance 125 mm., suitable for pumps groups DN 25. Equipped with connection (nut M8) for fixing brackets. Includes insulating shell.

E.705 “FLUIDHUB” coplanar manifold for hydronic systems, in coated steel with outlets distance 125 mm., suitable for pump groups DN 32. Equipped with connection (nut M10) for fixing brackets. Complete with insulating shell.

G.035 Modular brass manifold with by-pass from 3/4"M - Eurocunus, 50 mm outlets.
<<<   page    1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 >>>



Select a different language / country :



Login:
Username:
 

Password:
 

 
Have you forgotten the password?
Click here
Have you not registered yet ?
Click here
If you are not an Irish client click here
Click here
Need help?
Contact us
1800 553968
Request for copy
of catalogue or CD

 

Antares for water & fire - is an EEC registered trademark at n° 001642818 - All rights reserved
|  Home | Short History of Antares | Antares On-line | Advanced search | Technical datasheets | Orders | Registration | Help | Login | Comments |
| Corporate Group | Sales Conditions | Legal & Disclaimer | Privacy Policy |